To help deliver the best experience, this website uses cookies. By using this website, you agree to us using cookies. Read more Dismiss

View our e-brochures

+44 (0)1782 377550

Follow us on TwitterVisit us on LinkedIn info@mantectc.com

Why Emma Bridgewater Ltd uses Bullers Rings as an essential part of its Quality Assurance programme.

 
Emma Bridgewater Logo

Formed in 1985 and employing some 180 people, Emma Bridgewater Ltd prides itself in its “quintessentially English” design of pottery.

Emma Bridgewater's distinctive and highly collectable pottery is made from an earthenware mix that is a variant on Josiah Wedgwood's 18th century recipe for creamware. The company’s individual designs range from Spring Flower patterns to Polka Dot Hearts and Union Jacks to Kitchen Gardens.

Emma Bridgewater Pottery is still produced today in a large Victorian pottery factory alongside the Cauldon Canal in Stoke-on-Trent, England, where the use of Bullers Rings is considered an invaluable and essential part of its Quality Assurance programme.

Emma Bridgewater Pottery

What are Bullers Rings?

Bullers Rings LogoBullers Rings are Pyrometric Devices for accurately measuring the effects of ‘Heat Work’ within a kiln firing environment.


UK based Mantec Technical Ceramics Ltd specialises in the manufacture of the ‘World Famous’ Bullers Rings, which are utilised by many of the world’s leading Tableware, Sanitaryware, Brick, Refractory and Technical Ceramics Manufacturers to measure and monitor the amount of Heat Work that has taken place within the kiln. Bullers Rings provide an independent, accurate, reliable and essential indication that the firing of the product is correct and unaffected by any variations in temperature and kiln loading.


Heat Work

Bullers RingsHeat work is the action and effect of temperature over time on a ceramic product. It is often called ‘heat energy’. Simply put, ‘heat work’ is a defined measurement of how you have ‘cooked’ or ‘processed’ your product.

Too much or little time at the correct thermocouple temperature and the product may not have been fired correctly—It will be under or over fired. Therefore the measurement of heat work should be an essential QA parameter for all ceramic manufacturing facilities.


Why does Emma Bridgewater Ltd use Bullers Rings?

Emma Bridgewater Ltd has utilised Bullers Rings for more than 20 years. Prior to using the rings, the company had experienced significant problems with unevenness of firing, which led to inconsistent products and rejection of ware by the Quality department.

This problem of unevenness was reported to the kiln manufacturer, who promptly recommended the deployment of Bullers Rings so that the areas of under / over-firing could be readily identified. Bullers Rings have been used as an essential quality check ever since!

Emma Bridgewater use of Bullers RingsOver the years, Emma Bridgewater Ltd has perfected the balance of body / glaze maturity within the firing—a crucial characteristic to ensure that the decorative colours remain stable. To the kiln manager, Bullers Rings data is the first point of reference if there has been a problem with the firing, so that corrective action can be taken without delay or excessive cost.

How does Emma Bridgewater Ltd use Bullers Rings?

A series of Intermittent Gas Kilns are used to fire Emma Bridgewater ware. Bullers Rings are placed evenly on the kiln cars in quantities of 30 rings (15 per side) on the smaller kilns and 36 rings (18 per side) on the larger kilns.

The Bullers Rings readings are ‘mapped’ onto a chart which represents the position of each ring and a tolerance of +/- 3 ring readings is considered to be a normal ‘heat work’ spread. If any readings are recorded outside of this, then further checks are made as to the quality of the ware and the kiln integrity itself, further justifying the consistent use of Bullers Rings.

The Benefits

Emma Bridgewater’s kiln manager considers the use of Bullers Rings an “essential quality tool”, without which, the company would be left with a higher number of rejects and the need to carry out re-work on ware.

The use of Bullers Rings leads to maximum yields and thus profits, which come from consistent and reliable production. The consistent use of Bullers Rings ensure profitable firings time after time.
 

© Copyright 2017 Mantec Technical Ceramics Ltd. Normacot Road, Longton, Stoke-on-Trent ST3 1PA, UK    T: +44 (0)1782 377550    E: info@mantectc.com

Privacy Policy   |   About Cookies